van

Legomaniac

As I’m working on catching up with the blog posts, I realize that I need to make a quick Honorable Mention post to acknowledge Andy’s master-level Lego skills.

If you’ll recall in the last post, I mentioned how excited Andy was about immersing himself his niece and nephew’s Lego collections over Christmas. Yes, much of the Lego building time was spent with the kids, but if we’re being honest, he was rustling through those bins independently more often than not. I’m told that when he was little he rarely went anywhere without his tackle box full of Legos organized by color and size in each compartment. I think he’d still do that if he could get away with it.

Anyway, by the time we left Spearfish Andy had completed his finest creation yet: a scale model of the Turtle! It’s incredible, especially considering the fact that he was working with a limited supply of bricks, as all the more standard pieces had gone to building the Christmas train. So it was easier said than done, but still he got it done.

Check it out!

The doors even open and the hood raises up. It’s so cool.

A special thanks to Ellie and Will for letting their uncle plunder their Lego collections, even going so far as to take the tires off of Ellie’s new Lego VW Bug to complete the project. 🙂

After the build, he itemized all the pieces so down the road he can order them in all the right colors and build a true-to-life Turtle.

I guess this is what happens when a full-blown Legomaniac grows up to be an engineer.

Let’s Refurbish a Van – Part 6: Roof Rack (by Andy)

A post by Andy

{Note: The work detailed in this post was completed over the summer of 2015, before we moved into the Turtle. I am just getting the time to write the post now.}

So, we have stuff to carry. And we want a place to store our solar panels. And we want to stay cool. And, if possible, look cool. So, we need to put together a roof rack…

Here are a few pictures of the old RV when we got it. It had an aluminum ladder that was old and worn, along with the typical RV aluminum tube luggage rack at the back- all bits with some of the mounts loose. We also had a big plastic storage box bolted to the top, but it was cracked and would certainly leak. As you can see, there was also one solar panel and a mount for what I’m pretty sure was a TV antenna. Good stuff, but it was all pretty worn, as it had all traveled for close to 30 years and more than 250 thousand miles.

We wanted our rack and top equipment to do a few things for us:

Have a dry and accessible place to store camping and fishing and other fun gear, out-of-season clothing, and some spare parts and equipment.
Have the rack removable, so we can maintain and fix the roof when the need arises.
Have a location to mount the planned solar panels.
Design the rack to provide us shade.
Have a system that we can change, add more solar to, move things around, etc.
Be able to fill and seal up all the holes prior people made when mounting things to the roof, and have a system where moving forward we will not be drilling into the roof any more.

Anyway, roof racks look great! I hear they can be useful too. In truth, we have pretty limited room and storage inside, so having a bit of room up top for our extra supplies and garage-like stuff was essential for a successful voyage.

$safari-van-roofrack-back-retro-roof-rack-cartoon-style-isolated-white-view-61268999$

So, to the step of getting the old stuff off and sealing up the holes. Pretty much unbolt the bolts and pry everything else off. I then used fiberglass impregnated epoxy body filler for all the big holes (I love epoxy!), maybe adding wire to support it as it cured. I then added Geocel Proflex on the seams. I read about and tried a few things, but to date, it is my go-to for exterior sealing. Here is a link.

For the (many) smaller holes, I would first clean and fill with the Geocel, then screw in a stainless steel screw the size of the hole, then cover the head of the screw with another layer of Geocel. It is a technique I read about on the internet, and it seems to have worked well so far. Again, it is not worth buying any hardware but stainless or grade 8. It does cost a little bit more, but use the savings you get for doing this yourself to get the good hardware. Plus, you don’t have to worry about some interior rust and redoing the work down the road. After sealing the holes, I put down Rustoleum on all the modified spots. The following pictures show the antenna hole through the roof, and some of the removed parts scattered in the yard.

We were lucky enough to have a friend who worked for Yakima who gave us a VIP discount card for one purchase. With the card, we got 12 A1 rain gutter towers, 6 78″ crossbars, 12 wide body rain gutters, end caps, two 12-peice lock core sets, a Loadwarrior basket, and some cargo nets. A truly impressive amount of wonderful Yakima pieces at a great savings. Boxes and boxes of sweet components!

From REI, Amy and I used our one-item 20% member discount and each of us bought a Skybox Pro 12, shipped to the Portland REI for free. We got the long and narrow boxes to configure end-to-end, and not take up too much roof area width-wise. We effectively have the roof racks for 4 vehicles, all to put up top the Turtle. It added up to a lot of initial investment, but it has been working well, and added an important comfort to be able to store a reasonable amount of things to make our small world flexible, and I think it actually has a sleeker look being made from components—as opposed to a custom-fitted rack. Since we were doing all the work ourselves, we decided to invest a bit more on some nice new hardware. After popping down to REI and loading our new Skyboxes (in their own boxes) onto the top of the old Scout, we stopped for a bite in downtown Portland. Seems fairly reasonable to me, but I imagine to some people we made a sight…

The sky boxes, along with the other hardware, sat in the house for quite awhile. After stripping and sealing the roof, it was only logical to finish painting the Tutle blue, then do the white roof paint, and then finally get to the point where we could install the new roof rack. Consequently, this is what our place looked like for quite an amount of time. (As you can see, our front room was used to store a number of Turtle parts until they were ready to install.)

The pictures are few here, but after most of the painting was finished, I mounted the wide body mounts. I measured, marked, measured again, checked, and had the geometry figured out. On the corner of the Turtle roof, I would drill my two holes, fill with Geocel, cover the mounting surface with Geocel, align the bracket, screw in two (you guessed it) stainless steel lag bolts, then cover the seam and outside with Geocel. After it all cured, we repainted with the Interlux. It looked nicer with the black brackets and shinny bolts before the sealant and paint, but I didn’t want to risk it. And, just so you know, the asymmetric spacing along the length of the roof is due to needing to align the crossbars so they will not interfere with a roof vent when open, but also allow for the mounting points of the skyboxes. Here are the brackets installed:

It is a nice feeling to know that at any point we could unlock (all keyed alike, now) the 12 towers, unscrew, and remove the whole rack if we had to do some maintainence on the topside. Anyway, the pictures are limited at this point, but following are some involving the tower, crossbar, and rack install.

You might notice that the Yakima basket lost out to the solar panels. The basket is in the storage unit presently, and it would be great to get it up there at some point. When we were building and installing the rack, though, the geometric logistics were far too difficult for the time allocated. Anyway, to install the solar panels, I bolted two pieces of 12′ 6061 T6 aluminum square tubing to the crossbars with stainless steel carriage bolts and nuts fitted through the Yakima Universal Snaparounds.

I picked up used ones super cheap here. By the way, ReRack in Portland are nice people and can save you some money on roof racks, so check them out if you are in the area. Back to topic, after getting the aluminum properly spaced and installed, I then drilled and screwed the solar panel brackets to the the aluminum. That step was a breeze. Solar panels installed, photo taken probably a month in.

As to keeping it all cool. We planned on (and did), paint the roof surface with a couple of coats of Interlux topsides white boat paint. We actually painted the roof vent covers white as well. The assumption is that paint will reflect much of the sun’s heat, and be able to withstand the UV rays. So far, everything looks pretty good up there. We have some cracks in the paint where the caulking we used was not completely cured before we painted (I don’t blame the paint, we had time constraints), so we have some washing and fixing of some seams to do. Otherwise, all looks pretty good. A common approach for keeping a bit cooler is to have a couple of roofs, effectively carrying your own shade along with you.

The above old-school Rovers have a second roof with an airgap for passive cooling in the hot sun. (Side note, did anyone notice the tall skinny tyres the rovers are running on?) With the spacing added from the rack towers, and mounting the solar panels and boxes above the crossbars, we have a impressive air gap and continous shade on over 50% of the roof.

Currently, there is a middle strip free for walking, in which I will fit an additional panel at some point, then simply make some cheap synthetic or plywood panels and paint them white to increase our shade to close to 100%. So far, though, we have been to the Badlands of South Dakota in the summer, and have stayed with the ambient temperature with thoughtful venting and minimal electric fans.

To me, the goal is not to be cooler than the outside, all we need to do is not be hotter than the ambient temperature in all kinds of weather.

Oh, almost forgot, we want to access the roof! We need to clean the solar panels, get stuff into and take stuff out of the boxes, check on all the paint and seals, and most importantly, be able to climb up and yell with arms outstretched like you are in a movie! Anyway, the ladder…

We actually bought a car roof rack ladder as a start. The almost $200 ladder (seems crazy) was well worth the money, in the time saved. It always feels pretty weird to buy something new, remove it from the box, then start cutting it right away. So, the ladder, welding, adding more rungs for the proper length, and fixing the folding function.

Some close-to-final pictures here. We started with a 9-rung foldable ladder, and ended with a 12-rung rigid ladder that bolts to the bumper and the top rack. Again, it was designed to bolt to the bumper and rack, so it is removable…

I’m pleased with the removability of the ladder, because we crushed it a bit when we backed into a tree one day, about a week after it was finished and installed. The ladder was subsequently unbolted, straightened, and remounted. From the side, it now does have a bit of ripple (below the designed joint and by the spare tire)—this is what we call life.

To sum up a bit, up in the boxes right now we have a few fishing poles, extra wire and parts and unfinished projects, cloth for sewing projects, extra window insulation, snow shoes and masks and fins, river tubes, my old tent. A pair of driving lights I have yet to wire up. Some cheap speakers I plan on installing in the doors. You get the picture. We call it our attic.

We have a completed rack now. It holds our solar panels, is our attic, and still has room to exapand.

Let’s Refurbish a Van – Part 5: Suspension (By Andy)

A post by Andy.

{Note: The work detailed in this post was completed over the summer of 2015, before we moved into the Turtle. I am just getting the time to write the post now.}

We wanted a little more ground clearance, fender and frame spacing for the taller tires, and a good, safe ride. We initially hoped to find an off-the-shelf lift kit. . . no soap. People make them for Ford trucks and Broncos, nothing for 80’s vans. I suppose that makes sense; the van market must be pretty small. So I guess we’ll just have to design and install a complete suspension overhaul and customization ourselves. This is where we started…

In the front we have what Ford calls a twin I-beam suspension with what I infer is an aftermarket sway bar, and the rear is just a simple leaf spring configuration, though there are functional aftermarket Firestone airbags that have been added.

Let’s address the rear first; that is comparatively easy. We found some 2″ lift blocks from Action Van (http://www.actionvansuspension.com), that fit between the axle and leaf spring. Action Van actually makes full lift kits, but only for ’92 and newer Ford vans. Lucky, the rear suspension was the same, so we were able to use their blocks for the back.

With some breaker bars on the end of the socket wrench and a little groaning, the blocks were pretty easy to install. Lots of jacks and heavy-duty jack stands were employed in this step! Here is a poor photo of the suspension when I was starting the modification.

Here is a photo of the installed blocks. Always remember that it is a good idea to drive a bit and then retorque all the bolts for suspension components after making changes- things can settle under the vibration.

After adding the lift blocks, the rear airbags were adjusted by cutting, drilling, and painting 2″spacers from hollow square tubing and bolting into place between the axle and bottom of the air bags with new grade 8 hardware. Sorry for the bad photos (at the time, the important thing was to get stuff done, so the documentation suffered), but what you can see in the following is the original airbags and the blocks and hardware cut, drilled, and painted.

And a current photo of the final installed version- a little dirty, as we have been trekking about for a little over a year now.

Pretty straight-forward modification, and after a few thousand of miles everything is very solid.

Now the front suspension. The modifications needed were: 1) taller coil springs 2) adding air bags 3) fitting the new shocks 4) dropping the sway bar 5) dropping all 4 I-beam pivot points 6) replacing all the suspension bushings in the process.

I was able to find taller MOOG coil springs and front airbags, cranked everything apart, and got those pieces installed.

You can see that at this point with the added spring height but no change to any of the I-beam pivot points, the camber is extreme.

The next step was to remove the suspension mounts. This was a true pain, as there were many frame rivets to remove. Depending on the accessability, I would drill, grind, hammer, cold chisel, or simply swear at for long enough to remove. I would consider it a solid success if I came home from work, spent all evening, and got only one removed. I blocked it out, but there were somewhere between 16 and 20. Anyway, after getting the pivot points removed, I made some drawings describing the desired changes needed to drop the pivot points 2″ lower, then took the parts to a fabricator. I weld myself, and made the grill guard, and all other metal modifications on the Turtle, but I wanted really great welds on these parts, so we paid to have someone with more skills do the modification. Plus, it was pretty darn magical to just drop the parts off and pick up the finished pieces a few weeks later. So, some of the suspension pieces back from the welder:

Painting, almost ready to install. I had ordered new MOOG bushings for all the pivot points, so these were installed at this point too.

Except for reusing a few special Ford bolts, the bolts and frame rivet locations were replaced with 1/2″ grade 8 hardware. Some current pictures of the completed front suspension.

Here is a photo of the dropped sway bar pivots with the new greasable bushings installed, again, everything is grade 8 hardware. I never buy anything else (except maybe stainless for chassis fixturing or the interior).

New Bilstein shocks were ordered for all four corners. The stock fit for the rear has enough travel to handle the 2″ lift, so we got the heavy-duty RV ones, and that was easy. We had to calculate the new front geometry to size the front, and went extra fancy with the front shocks and got an external reservoir setup. They look cool! (I ordered them from shockwarehouse.com, part number 25-177480 and 24-184663.)

Here is the front suspension a year into our travels. I was replacing the brake pads, so I took the opportunity to clean everything up, and also paint the hub with Rustoleum. We have had no problems with the suspension thus far.

The lift was added to enable us to have the taller tires, and to have more ground clearance. There have already been a number of cases where we figure we would have likely damaged something on the underside if we did not have the clearance we have. Additionally, with the clearance and narrow tires, we have made it through some pretty deep snow without problems. It has proven to be a successful modification. Plus, it makes the Turtle look cool!

Andy Wears Shorts in the Snow: Christmas In South Dakota

Happy New Year, everyone! Woo hoo!

2016 was a super exciting year in the Turtle, and the coming year should be equally full of challenges, victories, and vistas (and frisbee sessions for Scouty).

Before I get into our plans for the upcoming months, let’s catch up with some photos of what we’ve been up to since we left Yellowstone National Park last month! Since that very chilly week living in single-digit temps, we’ve learned a bunch about what we needed to do in order to better winterize the Turtle. So before we left Montana, we headed back to Mom’s house in Bozeman and got busy buttoning everything up with layers of insulation over the windows, extra curtains to divide the colder cab and loft from the warmer living portions of the Turtle, and some modifications under the hood.

Naturally Andy was in charge of the under-the-hood tasks, and he spent the week in Mom’s garage finalizing work on the second alternator. With that new addition we can charge our house batteries while we drive, as the solar panels aren’t getting a lot of sun in these winter months. Not surprisingly, this guy took the opportunity for a wiring project and really brought it to the next level. Give an engineer an electrical mission, and he’ll buy all the toggle switches Home Depot has in stock and create a panel worthy of the dashboard of a UFO. I still need to take a photo of the installed panel, but the process picture gives you a pretty good idea of the extent to which this guy takes on a project!

Meanwhile, in between my winterizing duties, I got an extra week to hang out with my mom, sister, brother-in-law, nieces and nephews. We crafted, played video games, and I took on a request for a Photoshop job: Clive wanted to see himself in his “boat” on the water. . . “with a beard!” Turns out that kid could totally pull off a beard.

Even Gracie appreciates how awesome these kids are.

The snow continued during our stay, much to Scout’s delight. This border collie LOVES snow! He leaps through the drifts with abandon, and runs back and forth between us, trying to encourage us to run along with him.

Gracie, on the other hand, finds the warmest covered spot and settles in.

After getting used to living as locals, it was hard to leave all my favorite people. It was such a treat that we were able to spend so much time with them though. In the Pre-Turtle days, we were typically limited to a week each year at most for visiting family. So I can’t get too greedy when I just got to hang around for a whole couple of months!

Once the improvements were complete, and I felt confident that the kids were ready to love The Legend of Zelda without further encouragement from their auntie, we left Bozeman. After a quick stop in Billings to see Blake, Martha, Harper, and Grant, we then made our way toward South Dakota. We drove by Little Bighorn Battlefield right before it closed for the day, and took a brief walk through the grounds as the chilly winter sun set.

Then with the heater on full blast, we moved on to Gillette, WY for the night where I got so unbelievably sick. (I’ll only include this because I promised in a previous post that I wouldn’t overlook the portions of full-time vandwelling that are challenging, and this was just AWFUL.) I’ve gotten sick a few times since we moved into the Turtle, but they were mostly mild illnesses that were inconvenient but tolerable. I’ve never gotten violently ill while living in the Turtle until that night in Gillette, and it definitely was more challenging than getting sick in a house.

I thought I had food poisoning, as I got sick so abruptly, but in retrospect I think it was likely a severe flu. I was vomiting so much all night (essentially into a pit toilet) that I got massively dehydrated, and unfortunately since we were in freezing temperatures our water tank had frozen and cracked and we had been carrying water around in jugs. As luck would have it we were low on water that night, so I was rationing water and sucking on ice cubes and trying not to step on Andy on the pull-out couch as I got up every 20 minutes to vomit. And the next day we had to move along, so I was sleeping fitfully on a bed rocking and bumping at 65 mph on the freeway. Glamorous!

So, there you go. Full-time vandwelling is not all roses. But for the record, I’m not trading it for anything!

At any rate, while I was in my sicky fog Andy got us to Spearfish in time for Christmas with his family. Much to Scout’s delight, the ground was covered in snow, with a whole bunch more in the forecast.

And much to Andy’s delight, there were plans to assemble a Lego train which would travel around the Christmas tree! I’m not sure how many total man hours were spent around the table between Will, Ellie, Andy and myself, but Andy outshone us all with his dedication to the cause, as well as his impressive Lego skills.

Between the four of us we created quite a spectacular Christmas train, if I do say so myself.

Ellie and I worked on Rudolph’s Christmas Car which led the way, and created bunches of Lego presents. Will put together the engine, the middle cars, the flatbeds, and made a magnificent cubist Christmas tree. Andy made a tippable car that he’d originally intended for imaginary molten metal, but that Ellie and I filled with our gifts instead. He also made a caboose equipped with a crane to hoist and deliver the packages, and it really works, and it’s awesome.

Each day we were surprised by the dramatic change in weather. One day: blizzard. (Andy wore shorts all day.)

The next day: sun.

The next day: more snow.

The next day: more sun!

Snow.

Sun.

You get the idea.

Highlights of our time in South Dakota also included:

Testing out the newly-wired Hella lights. . .

Learning about the difficulties of dumping tanks in winter when all the RV sites for miles around are closed for the season. . . (For those interested parties, it includes making friends with the on-site owner of a closed RV site and graciously being given permission to use the facilities if you can find it and not break anything, digging through the snow until you find the port, boiling hot water, filling a container with hot water, pouring it over the frozen cap until you can open it, taking a photo while your significant other waits for your assistance.)

Being co-planner for a stuffed animal beach wedding. . .

Waiting to see how Andy will alter the “LOVE” Valentine’s decorations his sister put on the mantle. . .

Towing stranded passengers out of a snow drift. . .

Finding Gracie tucked into cozy spots on the coldest days. . .

Scout just driving around town. . .

And knowing Christmas is officially over when you see the Christmas tree ablaze.

Coming up: We’re done with snow and are going to Mexico!

P.S. If you enjoy following along with our blog, don’t forget to click the “Follow” button, and you’ll get an email whenever we post! 🙂

Leaving Bozeman Harbor

We’re back on the road! It’s super, super exciting. When you’ve spent a year roaming and adventuring and then suddenly sit still for a while, the call of the road is stroooong. But even though we were looking forward to moving on down the road, we got a lot of valuable things accomplished in Bozeman Harbor, mostly lots of family time, and it was two months very well-spent.

We originally posted up for a bit to do some Turtle work before winter hits, and after a year of being in the Turtle, we finally finished the bathroom! Andy really killed it on the vanity and faux toilet tank. The “tank” is actually storage (our favorite word these days), but he even made a little flusher you can pull, whose only practical function is to be charming. Andy always goes the extra mile!

You could say it’s come a long way from when we first bought the Turtle. . .

I’d like to make it clear here that it didn’t look like the above photo while we’ve been living in it. . . That’s a BEFORE “before” photo. 🙂 We got a good amount of progress done before we hit the road, but as you can see in the photos below, the vanity was still completely inefficient for storage and took up a ton of room in the small space. And we still had that sink in there, which we didn’t find useful since there’s a kitchen sink three steps from this one, and we’d rather have the storage! But with all the work we had to do in the rest of the Turtle before hitting the road, this portion of the renovation was put on the back burner.

But now it’s done! And we loved our extended stay in Bozeman. We parked the Turtle at my Mom’s house, and while Andy reveled in his huge garage/shop space and engineered all kinds of new fancy Turtle improvements, I got to spend lots of quality time with my mom, sister, brother-in-law, nieces and nephews. I had the best time getting to be a local for a while, and my love tank is filled to the brim. 🙂

We even had a pasta party night, where we made homemade 4-cheese ravioli, sausage ravioli and fettuccini, and three kinds of sauces. If you’re thinking about inviting me to a party, I can promise I’ll come if it’s this kind of party.

We had a fulfilling and productive stay in Bozeman, and I was only able to leave knowing that we’d be back for one more short stint since I have to return on the 8th to ~~walk the green mile~~ go to a dentist appointment. In the meantime, let’s go to Yellowstone National Park!

Watching the Seasons Change in Missoula, MT

Is it really October already? At the end of the month, it will have been a year since we moved in to the Turtle! It’s fun to look back on the last year, and how we’ve spent our time quite differently than we’d expected. We make a lot of jokes about how it took us a year to make it from Oregon to Montana! Turtle time a real thing, guys.

We’d originally planned to divide our time fairly equally between the outdoors and visiting long-distance friends we didn’t get to see enough when we lived in Portland. Little did we know that the year would be quite so filled with people time! It’s been great getting to see people we’ve been missing, catching up with family and being around for significant life moments, and spending that quality time leisurely instead of smashing it all into a weekend. And then in a hilarious twist, after the year away from Portland while we caught up with old friends, we were missing our Portland friends Jason and Kelly so we planned a meet-up in Missoula!

For me, it was a super-fun collision of two worlds. I lived in Missoula for a number of years and have incredibly fond feelings for that charming little town. So it was a total blast to have Andy and our friends come and play with me in my old stomping ground! When we arrived in town we wasted no time getting to the river, and discovered that since the last time I was in Missoula, they put a dog park right on the Clark Fork river! So the dogs can all run freely together, and swim and drink as needed, right in the middle of town. Plus it’s called Bark Park, so bonus points for charm.

We got there in time for some glorious sunny days, so we spent as much time as possible on patios. Jason only ordered drinks in novelty glasses, as far as you can tell from this picture.

Missoula is small and super walkable, so we wandered around from place to place all day and into the evenings. And to add to the list of reasons I love Missoula, someone had put two pianos on the street that remained the entire time we were there, so Andy played them every single time we passed them! It set such a whimsical mood to hear piano music drifting throughout the streets downtown, some people playing difficult pieces beautifully and surprising their friends, others laughing while they tried to remember how “Heart and Soul” went. (Andy was the former.)

One of my favorite days was spent at my very favorite spot: Red Rocks! It’s a short walk from Whittaker Bridge, just east of Missoula, and has a nice beach, a beautiful view, and slow spots where you can swim or wade, depending on the time of year.

We relaxed in the sun and played Ladderball (or Montana Golf, or Snakes, depending on whose side you want to take in the discussion of the correct name of the game.) I hiked up to the top of Red Rocks and snapped a few quick photos as close to the edge as I dared.

We had a beautiful sunset on our way out, and to top it all off, while we were there, I found punctuation rocks! I mean, that comma, right? So the day was a resounding success. 🙂

It was great getting to see Kelly and Jason again, and to finally meet Brendan!

Jason had to get back to Portland, so we dropped him off at the airport (right on time, and he did not miss his flight. . . is how we will remember the day’s events in the future), and the remaining four of us drove south past Lolo to a nice camp site for a few days. Initially it was clear and warm, and we soaked up the last of the summer sun by the river.

Andy decided he wanted to cut his hair short, so Kelly and I gave him a picnic table haircut! Having your hair cut fireside is another perk of the Turtle life. So is getting your picture taken at an unfortunate middle phase of that haircut.

At one point, the weather remembered it was supposed to be Fall. Fortunately, we’re all hardy campers and had a great time despite the wind and rain. We cozied up next to the fire, had slow-cooked bacon and huckleberry pancakes, hunted for firewood by the river, played more Ladderball, and sat around the fire some more.

It happened in an instant but we realized, as the dogs peeked out at us from the wind-squashed tent and the leaves swirled around our rainy picnic table. . . fall was upon us! We were sorry to leave when the time came, but the weather made it easier to admit that being indoors sounded cozy!

I left Missoula with Kelly and Brendan and we drove to Portland while Andy stayed in the Turtle at the camp site to finish out the work week. I spent a week in Portland, hanging out with friends and my sisters, nieces, and nephews.

The week flew by, and in a flash it was time to go. I road-tripped with my brother-in-law back to Bozeman, where we met up with Andy at my Mom’s house. Since we arrived we’ve had lots more quality time with her, my other sister, and my other nieces and nephews! There’s a lot of us. Which means we require a lot of time to catch up! It’s been such a treat to see everyone on a more regular basis, being around for birthdays, learning to snap, and loose teeth, and we’re especially savoring it because we realize that we’re not going to spend every year the way we’ve done it this time—hopping from town to town hanging out with all our buddies.

It’s been so much fun to make this year a people year, but as we approach our year Turtle-versary we realize we also need to focus on the other reason we chose this lifestyle, which is getting outside and playing hard! We’re going to have to break the news to Gracie, who is thoroughly enjoying the comforts of Mom’s house. . .

But we’ll use Clive’s pop-up illustration of him and me roasting hot dogs over the fire as inspiration to get back outside!

In the meantime, we’re using our time and resources at “Bozeman Harbor” to get the Turtle in top shape before we get into the snow. As I sit bundled up indoors with a nice cup of coffee, I’m thinking this will be a good time for reflection as we approach a year of being full-time vandwellers. So look forward to posts where I dish the details of Turtle life—the good, the bad, and the breaking-down-by-the-side-of-the-road.

Happy Fall, everyone! 🙂

A Quick Photo Catch-Up

Wow, what a busy month it’s been! We’ve been super-duper on the go, so instead of trying to document all the fun in words I’ll do a quick photo-heavy catch-up instead. And actually, we’ve been so busy that I haven’t even been taking many photos! So that helps expedite things, doesn’t it?

We left Seeley Lake in July and drove up to Great Falls, Montana, where Andy grew up. His parents both still live there, so we were looking forward to spending some time with them, and I was excited to be taken on the Hometown Tour. (Don’t quiz me on it though; we were so busy we didn’t even find time to drive by his old house! Next time.)

Northern Montana is as beautiful as you’ve heard it is.

This picture was literally taken from the Home Depot parking lot.

We spent much of the time at Andy’s dad’s place outside of Great Falls, and were treated to one beautiful sunset after another, along with lots of delicious home-cooked meals and great conversations!

A wonderful bonus surprise during this trip was the discovery that Andy’s dad is a fabulous and inspiring artist. I’ve always been taken with Andy’s Renaissance man-ness, and it turns out it’s inherited! From sketches to paintings to carvings, the house is a veritable art gallery.

Though Andy had to work much of our time there, we managed to get outside a fair amount, helping Andy’s dad with some upkeep on the cabin he built some time ago. The location is wonderfully silent and overlooks fields, the Sun River and lines of lush trees.

While I stained the cabin, I got the feeling that I was being watched. I turned around expecting to see Scout pleading for frisbee time, but instead I was startled to see a herd of cows closely watching my every move!

They stood over me and oversaw my work until the sun set. It was hilarious.

Scout and Gracie also enjoyed their time in the Montana outdoors. Gracie was stuck in the Turtle for a number of days while Andy worked, so the moment she got a taste of freedom, that girl was up a tree!

Here they are modeling the new curtain I made while we were in Bozeman, which blocks off the front of the Turtle and keeps the back nice and cool! Andy’s brilliant idea + my love of sewing. You’re welcome, Gracie and Scout.

After lots of swimming with Andy’s mom, lots of pizza dinners in town (a Goodman family tradition), and lots of inspiring sunsets, we left Great Falls on our way to Boise. We only broke down once!

On the way, we stopped at Kimberly, Idaho to visit the Higdems. This time Andy didn’t have to work the whole stay, so we got lots of time with them to visit. They’re a hard-working pair, and it was the height of harvest time, so we got to watch them in action as they took care of the animals and crops. We also were lucky enough to be gifted bunches of fresh veggies to take with us on the road! What a treat.

A quick stop at the Snake River Canyon on our way out of town for a great view and some sweaty palms (guess whose). It’s unbelievably high up!

We didn’t fall off the bridge, and shortly afterward we made it to Boise!

Every year my college girlfriends, Beth and Lexie, and I meet up for our Girls Trip! This year we met in Boise because Lex was moving to town for Grad School. Exciting! So we rallied the troops to help her get moved in, complete some Craig’s List furniture transactions, and tell the same old jokes a hundred times and still find them clever and hilarious.

And of course, we had to help her find the good spots for an after-class brew. It takes research!

Beth left way too soon. But as always it was fun and fulfilling to see each other again and give each other a hard time and just laugh like maniacs together. Andy and I stayed in town for the rest of the week while he worked and spent his evenings at his college buddy Dave’s place. So they got some great friend time too, and caught up in the evenings on his back patio. They had a pretty ok view.

Meanwhile, Lex and I ran more errands. And ate more yummy food at the cute local restaurants. Again, research.

Dave let the three of us tag along to an evening work event at the zoo. We got to feed a giraffe! And we saw a snow leopard chase its tail! And if you’ve never heard of a Maned Wolf, you should really look it up when you get a chance. What a crazy, cool imaginary animal.

The time to move along snuck right up on us. It’s always hard leaving anywhere we go, but especially when the place is home to our best buddies. But when the next destination is where you will meet up with your other buddies, it makes the sting a little easier to bear. 🙂

So on we drove to Missoula, to meet our Portland friends Kelly and Jason for a week of Montana shenanigans! And of course, more Montana sunsets.

The Story of Gracie the Camping Cat

We get a lot of questions about Gracie. A lot!

I agree that it’s bizarre for a cat to be roaming freely in camp sites. Some people think she’s super rad and hilarious, which is true. Some people think it’s crazy that we brought her along on our travels. Some people can’t believe she’s actually a happy camper. And some people just like to look at cute pictures of cats. So I thought it would be fun to tell the story of how Gracie came to be a camping cat, and to talk about what a blast she’s having! I think once you get to know her better, taking her on this adventure will seem like the obvious choice. 🙂

About six years ago, I went to adopt a cat at the Oregon Humane Society. For whatever reason I really had my heart set on an adult male, preferably orange. As I walked up to the building, I saw a tiny little grey and white kitten staring out the window of the Cattery (I did not make that name up). She wasn’t looking at any of the people walking by, just staring outside with those big green eyes. I remember thinking how adorable she was, but I really didn’t want a kitten – I rented and it seemed too risky to box train and worry about new kitten behaviors.

I asked to hold a 2-year-old orange male named Garfield, but he was visiting with someone else. So while I waited I figured it would just be fun to hold a kitten, and they handed me the little window kitty, Henrietta. (I know, who is in charge of naming cats at that place, right?) She was freaked out and ran under the bench and didn’t come out for over five minutes before I finally lured her out. I held her close to me and she instantly started licking my cheeks and nose and purring like crazy! I was done for. Well played, Henrietta.

I found out while signing the adoption paperwork that she was 6 months old and had been brought in with a litter of kittens who had been born outside to two barn cats. The barn cats’ owner said they’d fed the kittens and even left a litter box outside, so she was already box trained and personable. Which was a relief, considering the aforementioned rental issues that I’d tossed right in the garbage when that kitten kissed my nose.

My plan was to keep the newly-named Gracie indoors, especially since I lived on the corner of two main streets in Portland. Her plan was to return to the wild at all costs. While she and I bonded and she loved to snuggle and play, she also spent a fair amount of time plotting her escape to the great outdoors. Screens were destroyed whenever windows were opened, and a complicated system was put in place for leaving and returning through the front door. She was a happy little kitty and she was very lovey with me, but it was obvious she still just wanted to go play outside, where she’d spent all her life up to that point.

After a while I moved to another house, this time in a quiet neighborhood. Gracie hadn’t relented on her mission to Shawshank herself out of the house, so I began trying her outside in the fenced back yard. She was awesome! She’d often break out of the fenced area, but never went far. She’d usually just go to the boat parked next door and sun bathe on the bow. I practiced calling her back in, usually with treats involved, and she’d always return to the front door, where I’d let her back in. To get in the back yard, I taught her to climb a ladder to hop back over the fence, and she took to it instantly. She’s so strange. It’s her best feature.

The longer she and I were a team, the better she got at listening to directions and trusting me. She grew into an affectionate, interactive, adventurous, chatty cat who purrs loudly, plays hard and eats like a wolf. She also has a knack for getting into trouble, but so sweetly and honestly it’s laughable. Andy says that if he didn’t know Gracie, and couldn’t see her antics with his own eyes, he wouldn’t believe pictures of her weren’t staged! She’s just a riot.

Andy isn’t a cat person, and even he admits that Gracie is the coolest. I call her the Gateway Cat, because she truly has convinced anti-cat people to reconsider their position. Some have even adopted cats. That’s my girl!

We also call her the Anti-Project, because she has a knack for sensing when a project is being executed and expertly interferes. Just try to start that project, and then: Enter Gracie.

It’s a gift, really.

Try to measure some fabric:

Try to recycle paper trimmings in paper bags:

Try to take a profile picture for your school portfolio:

Try to print a document:

Try to change the bobbin:

Try to pick huckleberries:

Try to fill boxes for the move:

Try to enjoy some cheese and crackers during a movie:

Try to put away groceries:

You get the idea.

And you can see what an independent little monkey she is! So when we decided to take on the Turtle lifestyle, I had no doubt that she’d adapt flawlessly to a changing venue. We started her out with a harness and leash, and gradually began giving her a little more freedom when we were in safe, secluded spots. We discovered that she’s very careful in new environments, and when she gets scared, she always runs home and hides under the Turtle. If she’s out of sight, when I call her name she always meows back from her hiding spot! When called again she comes running back. She needs the freedom of the outdoors, but she loves us best and knows she’s part of our team, so we know she’ll always stick close.

So close, in fact, that when we go for short walks she comes along with us! She stays right near us, chirping and chatting down the road. When we reach our destination, she sunbathes and crawls into our laps, or pounces on bugs and climbs trees. We always put her inside if we’re going too far for her to join, and never take her on busy roads, but if we’re walking around a campground or up a trail, she can generally be spotted at our heels or at the edge of the path leaping through bushes.

This lifestyle is perfectly suited for our wild girl! Before, when we both worked full time, she’d be home alone for eight hours a day. She’d roam around the back yard and in the neighborhood, but she’s so social that she prefers people around to interact with and needed lots of attention when we’d get home. Our friend John—who lived behind us— told us that one warm day when he was cleaning house with the door open, he walked into his living room to find Gracie sitting in the middle of the room! And that wouldn’t be the last time she dropped by to visit John unannounced. She likes to be around her people.

Now we’re with her nearly all the time, and she gets a new back yard to explore and play in every week! She is very happy and safe. Yes, indoor-only cats have fewer risks, but this girl was going to play outside with or without our consent! So we compromise, and she stays close to us, and we give her plenty of options for safe outdoor spots to explore.

And now that she has freedom, she’s very happy when it’s time to stay indoors. She’s a real cuddler, and if you sit still for more than 30 seconds, she’ll usually end up in your lap, or sneak up on you and lick your cheeks while she purrs loudly in your ear. If I’m trying to read and she’s feeling sweet, she’ll hold my chin between her paws so I can’t turn away while she licks my face!

She’s the happiest she’s ever been, and loves to meet new friends on the road. If you see us camped out somewhere, stop by to visit Gracie the Camping Cat!

And if she’s not home, just check the nearest trail. . .

Huckleberry Heaven: Seeley Lake, MT

Of all the places we’ve been so far, never have we been so perfectly in the right place at the right time! That’s right, huckleberries are ripe early this year and we’re camped out right in the middle of a huckleberry field!

If you’ve ever eaten fresh huckleberries, you will agree that this is likely the most magical part of our journey yet. If, tragically, you haven’t had the pleasure, do yourself a favor and come to Seeley Lake right away and I will treat you to the yummiest berry you have ever tasted. Of course I can’t tell you where the berries are—when you have a good huckleberry spot, you keep that information locked in a vault! I probably wouldn’t have even told Andy if he hadn’t been with me when we found them.

Ok, I probably would have. We’ll assume I would have. 😉

It all started at our camp site at Big Larch. We were walking Scout down to the water for some swimming, when Andy saw a ripe huckleberry on a bush along the path. We were so excited! Huckleberries usually aren’t ripe until mid-August! After a (quick) swim, we rushed back to the Turtle and got a couple Nalgenes and outfitted them with paracord and duct tape to make hands-free berry pails.

We picked like crazy, but the spot was pretty thin. We worked for about an hour to end up with a few handfuls of berries, but it was worth it!

Now that we knew there were ripe berries to be found, we were on the lookout. In between Berry Bush Searches, we enjoyed our camping spot: riding bikes, fishing, collecting firewood, and late nights stargazing and chatting by the fire. And of course, cooking up our berries into fresh huckleberry pancakes!

Gracie climbed trees pretty much the entire time. Our neighbors all thought she was hilarious. (I often forget how rare it is to see a house cat roaming around a campsite. We think it’s pretty normal these days!) I tried to get a photo of her up a tree, but the only one I was quick enough to capture was this one, and she’s mostly behind it!

I did get a great video of her racing up a tree and bounding off, but I don’t know how to upload videos to the blog yet. And it’s gorgeous outside so I’ll teach myself on a rainy day! You can see it via our Instagram though: #blueturtlecrossing

After a week at Big Larch, we left to meet up with Andy’s family at a cabin in Seeley for the week. We had an awesome time! We fished and swam in the Clearwater River running behind the cabin.

We took a day trip up to Rainy Lake (not rainy this year, woo hoo!). We picnicked, fished, kayaked, and caught crawdads*.

*Andy and his dad caught crawdads. I did my best, but mostly terrified everyone at random intervals by shrieking whenever one raced through my fingers as I tried to scoop him up.

We took a day trip to Lake Elsina where we fished, built fairy houses, floated, caught frogs, and sketched.

And to top it all off, while on a hike to find a fishing spot we stumbled across a huge huckleberry field covered with ripe berries! There are camp sites there, so Andy and I plunked our tent down to save the spot and we got to work collecting berries. The whole family helped, and during our stay at the cabin we had huckleberry pancakes, huckleberry bars, and huckleberry cocktails. It was pretty freakin’ fancy.

I love huckleberries more than any fruit on the planet. They’re small, but pack an incredibly intense sweet flavor. Yes, they’re related to blueberries, but there’s no comparison! They like blueberries’ much more stylish and exotic cousin, who has loads of exciting stories to tell and a great sense of humor. And looks great in hats.

Based on our huckleberry discovery alone, we decided to stay another week! Our site is beautiful, overlooking the lake, and we’d love it even if it weren’t surrounded by ripe berries. . . but they really do put this place over the top.

We’re definitely making the best of it—every day we’re out collecting berries!

Huckleberries look like small blueberries, with the same “bull’s eye” at the base, but their color can range from black to blue to purple to red. And unlike the copycat bushes we’ve been seeing next door to the real bushes, the leaves are staggered—not paired. Don’t forget to push the leaves back to check underneath – that’s where most of the berries are hiding! We’ve found a wide array of colors and sizes here, and they all taste spectacular.

We’ll walk down the road, with Scout leading the way and Gracie following close behind, and settle into a nice spot.

Gracie rolls in the dirt and perches on logs while Scout leaps through the bushes and grazes. Andy taught him to pick berries right off the bush, and now he happily helps himself! (Another funny video of Scout picking berries at #blueturtlecrossing, or if you’d like, you can follow us on Instagram at @amycsummers)

Every day we make a huckleberry dish; the most decadent so far was the huckleberry sangria I made two nights ago. It was divine. A friend of Andy’s caught and delivered four delicious cutthroat trout right to our site the other night, so we cooked that up on the fire with our sangria and felt very spoiled indeed. Thanks Joe!

We’re heading to Great Falls in a few days, so I’ve got to go back to berry picking now! My goal is to fill the freezer before we leave—we’ve got a 1 1/4 gallons so far, so I’ve got work to do!

Wahoo!

Let’s Refurbish a Van – Part 4: Curtains

Of all the updates one can make to an RV, in my opinion the most drastic change for the least amount of effort is the curtains. It’s a way to infuse color, pattern and texture into the small space, especially in a vehicle like the Turtle, which has zero wall space for art. We almost have zero wall space for walls! Even if you aren’t a world class seamstress, it’s a simple shape to tackle, and honestly nobody even notices if your hemlines wobble a bit. I really encourage you to give it a try!

When we got the Turtle, I knew I wanted to plan all my color choices around the curtains. It’s the best place for statement patterns, and I love-love-love a bright and colorful interior space, so I wanted to see what was available before making further paint or fabric decisions. Actually, it was the first decision I made at all, and I think I had the fabric in hand within the first week of owning the Turtle! I love a whimsical graphic print, and the green shade is so friendly and cheerful.

When picking your curtain fabric, I highly recommend choosing outdoor fabric. This may sound obvious, but the selection of outdoor fabric is often pretty slim, and the allure of an entire store full of pattern and color choices seems like a fine trade-off for less sturdy material. But the outdoor fabric won’t fade as quickly as other fabric. It’s also mold and mildew resistant, which doesn’t seem like a big deal until you’re boondocking on the Oregon coast and the hygrometer reads 93% humidity and the windows are weeping and mold is knocking at the door. The last thing you want is to find your curtains flocked with green fuzz! Ours stood up to the damp like a champ.

Something to keep in mind about outdoor fabrics, though, is that due to their durability, they are slightly more stiff, and don’t bunch or ripple like regular fabrics. But if you take that into consideration, you can work around it by reducing the ripple a bit or giving your curtain rod span a few extra inches to account for the thickness when the curtains are pulled open.

As you can see, I opted for a gentle ripple, and at the top and bottom it’s still pretty thickly bunched. Additionally, since we don’t have a ton of room on either side of the windows in the Turtle to add rod span, that extra fabric to make the ripples does take up a little window space when they’re pulled open. So it’s good to pick the fabric you like, then decide how you’re going to mount the rods and how much the ripple will affect the length of each panel.

With that in mind, it’s time to determine yardage so you can buy that awesome fabric you found! What I needed to consider with our curtains was the fact that the Turtle’s walls are curved, so I’d need rods on the top and bottom to avoid them hanging far from the wall at the bottom. (I’d actually recommend this even for straight walls, as it keeps more light out and doesn’t blow around.) So I hemmed pockets on top and bottom, and made a double-fold hem on all sides. The double-fold isn’t necessary, but it’s a nice detail. Just fold the hem over, press it with an iron, then fold it over again, press it, pin it, sew it down! Do this to all four sides before sewing the pockets so the rods can slide through.

Then fold the top and bottom pockets over, press them, pin them, sew them! This part can be tricky if you’re using two rods, as it needs to be nearly perfect so that the curtains stay taut but don’t pull on the rods or just not fit altogether. Even after explicit measuring, I ended up spending some quality time with my seam-ripper as I tried to get the fit just right.

Oh, did I mention I had a hard time getting the fit right? Yes I did. It was difficult getting them to not balloon out, and when I took them in they strained the rods since they were a little too short. In the end, I had to make another pocket and sew it to the top of the curtains. This made it easier because I could adjust the pocket right on the rods and pin it in place before sewing it. If I did it again, I’d just plan on approaching it that way to save a headache! Luckily I love the way it looks, and if anyone asks, you can tell them I totally did it on purpose.

For the rods, I bought some dowels from Home Depot and some wood end pieces from JoAnne for the finials. Cheap! Andy sanded, stained and varnished them for me, and screwed the finials into the dowels. The benefit of doing it this way was that we could cut them to the exact size we needed inexpensively, and the wood end pieces already had holes through them, so screwing them in was really simple.

Andy’s genius came in handy as we tried to figure out a way to mount the rods. He found some utility tool hangers at Home Depot that fit our rods perfectly and hold onto them tightly enough that they don’t slide back and forth. We painted them white, and done!

For the tie-backs, I just sewed a strap with some navy fabric I found in the remnant bin at Mill End, and attached one end of each to some stainless steel eye screws I’d screwed into the wall.

The other end I attached to stainless steel S-hooks.

They wrap around the panels to hold them back, and then when the curtains are open, we just re-hook it so it stays out of the way (and so Gracie isn’t as tempted to bat it around).

And there you have it! Inexpensive custom curtains that make a statement, liven up your small space, and are a nice splashy backdrop for pictures of your pets.

If you have any questions about the process, let me know! As with any How-To post, I’d be happy to explain any parts in greater detail to help get you started on your own project. 🙂

	Blue Turtle Crossing on 3 Months in Baja: San Felipe t…
	Blue Turtle Crossing on 3 Months in Baja: San Felipe t…
	Blue Turtle Crossing on 3 Months in Baja: San Felipe t…
	Kevin Wood on 3 Months in Baja: San Felipe t…
	Don Herington on 3 Months in Baja: San Felipe t…